low density silicon nitride ceramic machinery products
|Payment Type:||L/C,T/T,D/P,Paypal,Money Gram,Western Union|
|Terms of Trade:||FOB|
|Min. Order:||1 Piece/Pieces|
|Delivery Time:||15 Days|
|Place of Origin:||Guangdong,China|
|Supply Ability:||1,000,000 pcs/Month|
Model No.: S-003
low density silicon nitride ceramic machinery products
Reputation depends on quality, quality comes from Hard!
Machinable Glass Ceramic:
Many of the properties of silicon nitride are attributed to this structure. Pure Si3N4 is 3119, with both α and β crystal structures, all of which are hexagonal crystals. The decomposition temperature is 1800 ° C in air and 1850 ° C in 110 MPa nitrogen. Si3N4 has a low thermal expansion coefficient and a high thermal conductivity, so its thermal shock resistance is excellent. The hot-pressed sintered silicon nitride is heated to l000 ° C and then put into cold water without cracking. At less high temperatures, Si3N4 has higher strength and impact resistance, but it will break with the increase of use time above 1200 °C, which will reduce its strength and fatigue damage will occur more than 1450 °C, so Si3N4 The use temperature generally does not exceed 1300 ° C. Due to the low theoretical density of Si3N4, it is much lighter than steel and engineering superalloy steel. Therefore, it is better to use Si3N4 ceramic instead of alloy steel in places where high strength, low density and high temperature resistance are required.
High hardness, high strength, wear resistance, corrosion resistance, high temperature(1200°), good thermal diffusivity, good thermal shock resistance(avoid the temperature changing rapidly), good insulativity, low density. The comprehensive properties are best in most of structure ceramic.
Data Sheet↓Color: Black Grey
Vickers Hardness (Hv50): ＞1550 HV0.5
Modulus of Elasticity: 290Gpa
Flexural Strength: ＞600Mpa
Compressive Strength: 2500Mpa
Modulus of Elasticity(25°C): 65Gpa
Fracture toughness:＞6.0 Mpam1/2
Maximum Use Temperature: 1200°C
Thermal Conductivity:15-20 W(m.K)
Thermal Expansion Coefficient: ＞3.1 10-6/°C
Thermal Shock Resistance: 500 △T°C
Special Heat Capacity: 700 KJ/kg.K
Dielectric Strength: 1 KV/mm
Dielectric Constant: er
Volume Resistivity(20°C): 1.0*10(12)Ω.cm
Machinery, electronic, semiconductor, chemical, petroleum, smelt.
Welding shaft, electronic substrate, plunger, nozzle, slide guide, diesel parts, metal molding, shaft wheels etc.
Shenzhen Hard Precision Ceramic CO.,Ltd founded in 2007, located in Shenzhen of China. We are a company that integrates development, design, molding, sintering, production and sales of precision ceramic products. After 10 years of development, we have cooperated with more than 2000 customers and 60 universities; Our factory covers an area of 2000 square meters, 50 employees, and annual production value of nearly 20 million. We have a higher visibility and better reputation in the same industry.Our products include ceramic rods, tubes, plates, blocks and precision parts for industrial. We have all-line high precision equipments from ceramic forming, sintering to precision machining. Hope for a wide range of sincere cooperation with customers at home and abroad.
1.12 years of professional production industrial ceramics factory
2.High quality products with low price
3.High precision parts with lowest tolerance
4.Show time for production
5.Has a group of experienced, professional and efficient R&D team
6.Has a good reputation in China and abroad.
7.MOQ is not limited, small quantity is welcome.
8.Vigorous team and good after-sales service
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-30 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 50% T/T in advance ,balance before shippment.
SHENZHEN HARD PRECISION CERAMIC CO.,LTD
Shenzhen Hard precision ceramics Co., LTD. has been committed to design, development and manufacture of industrial ceramic products since 2007. Compared with metal, advanced ceramic has the following excellent performance: high hardness, high strength, high temperature (fire), and can wear resistance, corrosion resistance, acid and alkali resistance, oxidation resistance, insulation, non-magnetic and good chemical stability . So it is often used in the environment where the metal material cannot endure. With its promising application , advanced ceramics are widely used in aerospace, aviation, military industry, nuclear power, machinery, textile, chemical, electronics, food, medical and other industries. Our advanced ceramic products made by zirconia (ZrO2), alumina (Al2O3), silicon nitride (Si3N4), etc. Our products can divide into two parts: one part is ceramic ball, rods, tubes, ceramic materials such as plate, block, strip and so on, and the other part is the precision ceramic parts which are for industrial use and civilian products. Our company has advanced one-stop equipment and technology of ceramic forming, sintering and processing. Hope we can establish excellent cooperation with customers from at home and abroad for a wide range .
- Company Name: SHENZHEN HARD PRECISION CERAMIC CO.,LTD
- Representative: ZHOU SHENGBIN
- Product/Service: Alumina Ceramics , Zirconia Ceramics , Silicon Nitride Ceramics , Machinable Glass Ceramics , Laser Cutting Ceramics , Other Materials
- Capital (Million US $): US$500,000
- Year Established: 2007
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 81% - 90%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 5
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: Fewer than 5 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 1,000-3,000 square meters
- Factory Location: 1st F, Building 8, Nangang Second Industrial Zone, Nanshan Dist, Shenzhen,China 518055
- Contact Person: Mr. Watson Lin
- Tel: 86-0755-86238834
Premium Related Products